Mold is a microscopic multicellular fungus that is naturally present in the air and surfaces. Certain levels of mold are normal and are safe. Certain amount of mold is present everywhere and it cannot be completely removed. However, when this normal level of mold exceeds the normal limit, results can be harmful. Sani Effect aims to bring these levels back to normal- as a matter of fact, we Guarantee it.
Mold growth has been observed to grow rapidly, when confronted with water. Therefore, dampness and moisture to your property can trigger excessive growth of mold. Sani Effect Mold can solve the issue of high levels of mold by providing professional mold remediation service.
Proper mold remediation includes deep inspection of even inaccessible places of the property as mold can grow in the parts that are not so commonly identified. A major reason for sudden mold growth is water. Moisture can greatly boost mold growth. At Sani Effect, we investigate all of the possible moisture causing factors and sources. We then control the moisture prior to a sanitization treatment to control mold.
Mold Air & Surface Sanitization Services:
-
Mycotoxins Remediation
-
Attic Mold Remediation
-
Bathroom Mold Remediation
-
Air Duct Mold Remediation
-
Commercial Mold Remediation
-
Boat/Yacht Mold Remediation
-
Walk-In Cooler Mold Remediation
-
New Construction Mold Remediation
-
Real Estate Mold Remediation
-
Sanitization Mold Protocol
-
Detailed Mold Remediation Estimates
Stop Risking Your Health or Property.
Airborne mold is not visible to the naked eye and can be a major concern. Elevated mold spores are caused by elevated humidity plumes, water leaks, flooding and/or poor water and mold remediation clean-ups.
Airborne mold spores often spread throughout a building. Without a visible inspection for mold and active moisture issues and sampling for airborne mold spores, a mold assessment is incomplete. Don’t let an incomplete mold assessment cost your family their health.
Q: What makes Sani Effect Different?
A: Sani Effect has a slightly different approach to mold sanitization than traditional methods. We have the only solution to treat all air space & surfaces in the home.
By the time mold growth is discovered indoors it is too late to try and seal off sections to spot treat the problem. Mold spores are able to freely float around in the air and end up living in the carpet, clothing, furniture, surfaces and HVAC system.
Sani Effect Effective Mold Remediation of
Air & Surfaces
Sani Effect utilizes a Photo Catalytic Oxidation process that produces a 0.02 ppm hydrogen peroxide from oxygen and water vapor in the air (Eco Friendly) Invisible Plasma that deactivates mold spores, viruses, and bacteria by electrostatic attraction, to make the remediation /sanitization process safer and more effective.
This approach greatly assists on eliminating active mold growth in those hard-to-reach areas hidden from the naked eye. This step will “oxidize” mold spores, viruses, bacteria, VOC’s, mycotoxins and in the process “decontaminate” all levels of the building, including air conditioning/heating duct system decontamination / sanitization including all interior surfaces and airborne mold spores.
Q: Why choose Sani Effect's Air & Mold Sanitization service?
A: Sani Effect's Sanitization is superior to any leading competitor because it:
-
Eliminates mold on all surfaces and air
-
Prevents the re-growth of microorganisms
-
Nontoxic, eco friendly
-
Promote a healthy living & working environment
-
Safe for children, pets & plants
-
Stop the spread of microbes and mold
-
Lasting antimicrobial surface protection
-
Protects your home against bacteria, mold, fungi, yeast and related odors
-
Promote a healthier indoor environment
Q: Is Sani Effect's solution safe?
A: Yes! Sani Effect's solution is safe because:
-
No Cross-Contamination
-
NSF-certified for use on food contact surfaces
-
Rapid Action
-
Leaves No Residue
-
Safe on Electronic Equipment
-
No Toxicity
-
Environmentally Safe
-
Colorless and Odorless
-
No Wiping Needed
Q: What are the advantages and benefits of Sani Effect's Surface Sanitization?
A: Our solutuion is an EPA registered disinfectant that is proven to kill 99.999% of a broad spectrum of harmful viruses, bacterial, fungi, mold, mildew and any common virus. etc. Sani Effect's Surface Sanitization helps prevent the formation of mutating “superbugs” by killing more microorganisms than other products. Our product is known for being:
-
SAFE FOR USERS AND THE ENVIRONMENT - Sani Effect's Surface Sanitization is considered non-hazardous by OSHA, is non-toxic, non-corrosive, will not bleach surfaces to which it is applied. SANI Surface Sanitization also contains no VOC’s and does not irritate skin or the respiratory tract and has HMIS ratings of 0.
-
SAFE FOR USE ON FOOD CONTACT SURFACES - 99.999% sanitization on food contact surfaces; won’t alter the taste of food on the sanitized surface. No rinse required. NSF registered (D2) sanitizer.
-
MOLD & MILDEW KILLER - Kills mold spores and mildew at its roots; safe to use on a wide range of hard and soft surfaces.
-
ALLERGEN ELIMINATOR - Proven effective for molds, animal dander, dust mites and cockroach allergens. Can be used on animal bedding and on any surface an animal comes into contact with.
-
ODOR ELIMINATOR - End foul odors caused by animals, septic systems, smoke, trash, bacteria, mold and more. Does NOT mask odors, but eliminates them at the molecular level. Highly effective to neutralize urine and fecal odors.
-
HVAC & AIR DUCT SYSTEMS - Use in HVAC and Air Ducts for antimicrobial control of bacteria, mold and mildew, leaving the systems and ducts free of contamination thus ensuring high air quality.
